Product Details

Glastar Standard Diamond Wheels 8"x1-1/2"

Glastar Standard Diamond Wheels 8"x1-1/2"
Click to enlarge image(s)

Glastar’s Standard Diamond Wheels are meant for grinding hard materials such as glass, fiberglass, ceramics, marble, granite, limestone, composites and some plastics. They are particularly well suited for glass beveling, cold glass working and lapidary. Compared to stone, production will be increased tremendously using diamonds because of the higher shaft speeds possible and because diamonds are far more aggressive than stones. Glastar's reputation for the best in glass working equipment means the ultimate in long life diamond products.

These wheels use nickel to bond the diamonds. The coarse wheels (60, 100 & 180 grit) employ a raised cross-hatched pattern, which produces an interrupted cutting surface. It is far more aggressive than a smooth pattern and because there is one-third more diamond, it lasts just as long. The fine wheels (360 & 600 grit) have a smooth, uninterrupted surface.

These wheels are 8" x 1-1/2". When used for beveling glass, the 8" wheels can generate an inside curve as small as a 1-1/2" radius.

The standard hole size is 1" and bushings are provided for 3/4", 5/8" and 1/2".
Copyright 2016 © Three Georges, LLC, Florida
398 Interstate Ct
Sarasota, FL 34240
phone:941-379-8333
service@thegrindershop.com
Home  ·  About Us  ·  Contact Us  ·  Security  ·  Shipping  ·  FAQ's  ·  Privacy Policy